For beginners, the more volume, the better. High volume surfboards are more stable and make it easier for you to takeoff. More volume also means easier paddling. As you advance, you should try boards with less volume. They are more agile and better for faster turns.
The shape determines for which waves and which surf style the board is best for. When choosing a shape, your ability and level are the most important – that’s why you see a variety of shapes in the waves.
Mini Malibus are long, between 6′6 to 8′ and have a high volume. They are easy to paddle, stable and forgiving - perfect for beginners.
The rear part of the board is the tail. Its shape influences the speed, agility and control of your board. Here are the most popular tail shapes.
This tail shape is well suited for fast, steep waves. Its round shape makes it very manoeuvrable, but it is less stable than other tail shapes.
Because of the large nose, the surfboard has more buoyancy at the front which helps you paddling. It also makes the board more stable; great for beginners.
Many factors influence the behaviour of your surfboard in the water. In addition to the tail and the nose, the shape of the rails, the rocker and the bottom shape are also influential. Here is a short overview of these shapes and what they do.
There are different types of surfboard constructions. They affect the surfing behaviour, the weight and the durability of your board. Each has pros and cons, your budget, your surfing style and your surfing level will also influence your decision.
This classic surfboard construction uses a PU foam core with polyester resin. These surfboards are a little heavier and more susceptible to dings. Since the core draws water when exposed, any damage must be repaired immediately. They do, however, have a little more flex and glide more smoothly in rough conditions. They are also a little cheaper.
The final factor for the behaviour of your board is your fins. They differ in construction, size, arrangement, materials and other factors.
There are four common fin systems available. Before you buy fins, you should know which one is used for your board. Look at the fin box at the bottom of your board and you can find out which fin system your surfboard has.
Tip: It makes sense to buy all surfboards with the same fin system so that you can use your fins with each board.
With the FCS (Fin Control System) the fins are inserted into the fin box and fixed with two screws. The FCS is easy to use and you have a big selection of fins. You can find FCS fins all over the world – in case you break one.
This setup gives the board stability, support and speed. Sharp turns, however, are tricky as the big fin brakes in the corners. The single fin box is very long and lets you move the fin. The further forward you place the fin, the more agile your board becomes. If you place the fin further back, your surfboard will become more stable.
You don't need too much stuff for surfing. Surf wax or a traction pad and a leash belong to your basic equipment. For travelling, you should get a surfboard bag. The bag will protect your board and has space for wax, sun cream and everything else.
A leash guarantees you don't lose your surfboard in the waves and protects other surfers from your board. Leashes usually are attached at the ankle and are available in different lengths, thicknesses and colours. Longboarders attach their leash below the knee - It gives you more freedom to move up and down the board.
The leash should ideally be as long as your surfboard. This gives you maximum freedom of movement and safety. If there is no leash in precisely the right length, then round up to the next length.
No break near you? No problem! River surfing and wakesurfing are rapidly gaining in popularity throughout Europe and beyond. The ideas are simple; certain rivers have breaks in them where you can surf or you can ride behind a motorboat and surf the wake. Both are great for getting your surfing fix when you live far from the ocean.
If the stars align and the conditions are in your favour, you can surf your local river wave. Or if you're not so adventurous, there are stationary wave spots for riversurfing throughout Austria, Germany, Switzerland and Italy.
Spyder Surfboard reviewsNo break near you? No problem! River surfing and wakesurfing are rapidly gaining in popularity throughout Europe and beyond. The ideas are simple; certain rivers have breaks in them where you can surf or you can ride behind a motorboat and surf the wake. Both are great for getting your surfing fix when you live far from the ocean.
When the Dumpster Diver hit the surfboard market place in 2007, the choice of surfboards suddenly went through the roof. Up until then there were shortboards, guns, mini mals and longboards – and that was basically it. If you surfed a shortboard, then as you got older and less fit your board grew an inch. Volume, as a guide, hadn’t come into the equation back then, so you didn’t even have that to consider. Most board buying was down to length, width, thickness and the good old jiggle test. A lot of shortboard surfers sank or gave up, purely because of the paddle power of their boards. Choosing your next board was relatively easy if you had your boards dialled.
Nowadays however the scenario is totally different. There are hundreds of different shapes and designs out there to choose between: Different rails, rockers and planshapes. Boards for every wave size and wave shape – flat waves, steep waves, rolling waves. Boards for waves with different amounts of power. So you can fine tune your equipment and get exactly the right board for both how you surf and where you surf. But dialling that in can be a bit tricky. So, how do you do it? Well, once you’ve got to the board buying stage think how you surf (cruising, ripping, do you surf off your back foot or front foot), and how you want to surf? Do you like your board, do you need more help paddling and catching waves?
Then, you can decide how many fins you are going to go for. If you’re a top to bottom surfer who spends their whole time in the pocket, then the thruster is the one for you. Straight up and down the wave it’s hard to beat. Push hard and it’ll turn tight with great control. The down side is that you get drag from the centre fin, which means it’s not as quick as other fin set ups.
If you want to surf more of the open face then maybe try a twinny. Twin fins have really come into their own again over the last five years as they’ve been redesigned for modern day surfing and are now a valid one board quiver for surfing in the UK. That lively loose feel you get from a twinnie works so well on our weaker, slacker surf. They give you a lot more speed, as there is less drag. If you are out on the face they enable you to turn smoothly while holding your speed. The down side however is that on a steeper, faster wave, you might have to nurse a small wave twinnie a bit, as you don’t have that stabilising centre fin to push against. They can sometimes spin out if you push too hard. (Obviously twin pins and the like built for reefs and points have fins set up to allow for this, but going over the ledge on a twin is still an acquired taste for most.)
Somewhere between the two sits the quad. Quads get up to speed quicker than the thruster as you don’t have the centre fin drag, and you don’t have to work them like you do a thruster to generate speed (due to their forward drive), but they don’t generally turn as well or as tightly as a thruster.
When it’s small and weak surf, quads are great. Also in fast, hollow waves when high line speed is required, the quad works better than the thruster. When you want to turn though, that’s when the thruster comes into its own.
When it’s small and weak surf, quads are great. Also in fast, hollow waves when high line speed is required, the quad works better than the thruster. When you want to turn though, that’s when the thruster comes into its own.
Once your fin set up is sorted, you need to work out the correct board for your needs. The most important rule here is that a long standing relationship with an honest and experienced shaper or board salesman will pay handsomely.
0 Comments